CK6130S Slant Bed CNC Lathe Falco tare da Axis 3
Siffofin Samfur
Na'urar tana ɗaukar lambar lS0 ta ƙasa da ƙasa, Input Manual Data Input, an samar da ita tare da shirin kariyar yanke wuta da ayyukan tantancewar atomatik, kuma tare da ƙirar RS232.
Dogayen ciyarwar da giciye ana aiwatar da su ta hanyar ma'aikatan ƙwallon ƙafa waɗanda injinan servo ke tafiyar da su.
CK6130S: Ko dai gidan kayan aiki na ƙungiya ko 4-hanyar kayan aiki ta atomatik za a iya zaɓar.
CK6140S: Ko dai a tsaye ko a kwance 4-tashi ko 6-tashar kayan aiki post da kuma wani gungu kayan aiki za a iya zaba.The tukunya is located a kan daidai contrate gears tare da high maimaita matsayi daidaito.
Dukansu chuck da tailstock ana kawo su tare da na'ura mai aiki da karfin ruwa na hannu ko nau'in pneumatic.
Canjin saurin canzawa mara iyaka don igiya.
Dukansu chuck da tailstock suna samuwa tare da na'ura mai aiki da karfin ruwa ko na hannu ko nau'in pneumatic.
Wannan na'ura ce ta tattalin arziki CNC lathe sarrafawa da wani micro kwamfuta da kuma servo Motors kore.It dace don kunna cylindrical da taper fuskoki, m, tsagi da yankan zaren.
Ƙayyadaddun bayanai
| Abubuwa | Saukewa: CK6130S | Saukewa: CK6136S | Saukewa: CK6140S |
| Max. lilo bisa gado | φ300mm | φ360mm | φ410mm(16") |
| Max.swing over slide | φ135mm/100mm (gang kayan aikin) | φ270/180mm (kayan aikin ƙungiya) | φ240mm / 150mm (gang kayan aikin) |
| Max.cross Travel(X) | 180/270mm (kayan aikin ƙungiya) | 230/300mm (kayan aikin ƙungiya) | 235/300mm (kayan aikin ƙungiya) |
| Max tsawon workpiece | 500mm | 500,750,1000mm | |
| Abincin sauri don Axis X | 5m/min | ||
| Abincin gaggawa don Axis Z | 8m/min | ||
| Matsakaicin saurin gudu (Stepless) | 200-3500r/min | 200-2800r/min | |
| Ƙunƙarar leda | φ40mm | φ40mm | Girman 52mm |
| Taper gundura na sandal | MT No.5 | MT No.6 | |
| 3-Cikin ciyawa | φ160 ko 5c | φ200 ko 5c | |
| Gidan kayan aiki | Hanyoyi 4 ko 6 ko kayan aikin ƙungiya | ||
| Ƙarfin Servomotor (X/Z) | 0.75/1.0kW | ||
| Girman kayan aiki shank | 20x20mm | ||
| Min. shigarwa | 0.001mm | ||
| Maimaituwa (X/Z) | 0.0075 / 0.01mm | ||
| Ƙunƙarar saman | ≤RaO.8μm(Nonferrous)≤Ra1.6μm(bangaren Karfe) | ||
| Babban wutar lantarki | 3KW(4HP) | 3.7KW (5HP) | |
| Gabaɗaya girma(L*W*H) | (1870,2120,2370)x1200x1415mm | ||
| Cikakken nauyi | 950 | 170,020,002,200 | 180,021,002,300 |